Rolling edge-banding belt thickness 0.4-3 mm Rolling edge-banding belt height 15-63mm Workpiece thickness 10-60 mm Minimum width 80 mm Minimum length 160 mm Feeding speed of workpiece ＋15 m/min Air pressure 0.7 Mpa Edge-cutting motor ---0.37kw x 2 (12000rpm 200HZ) Edge-trimming motor 0.55kw〜2 (12000rpm 200HZ) Edge-removing motor 0.75kw〜２ (12000rpm 200HZ) Edge-polishing motor 0.37kw〜2 (1400rpm 50HZ) Workpiece feeding motor 1.5 kw 1400rpm 50HZ Glue box heater ---9x0.4kw Auxiliary Heater 0.12 kw Total power capacity 9.3 kw M
Product Description:
Robust machine structure, Compact design, Quick & Easy adjustments are all typical features of the "RC" Automatic Edge Banding Machine. Wide ranges of working units are available allow best composition for the application of edges such as PVC, ABS, Melamine, Veneer and Solid Wood.
Product Description:
Basic type manual edge banding machine, easy operation, suitable for straight and profile edge banding. Thermostat circuit kick off control system, are safety device. Working table surface plate by chromium, resist-grind and easy clean. Adjustment device for bottom edge materials. Thickness of banding material from 0.3 to 3mm. The machine is suitable for gluing edges of melamine, PVC/ABS or veneer on straight, round or free shaped panels.
Product Description:
Special designed for gluing edges of PVC, melamine or veneer,with thickness from 0.4 -1.0mm, on straight, round or free shaped panels with hot melt glue. It is the most economic manual feed edge bander and electrical driven only. No air required.
Product Description:
The CM has more function than CE, it also designed for gluing edges of PVC, melamine or veneer on straight, round or shaped panel with hot melt glue. However, it is enriched for edging ABS or solid lipping up to 3mm thickness which to be cut to size by a reinforced pneumatic knife.
.jpg)
