1.CENA type has a timer, which controls the operation and interval time. It has operation, abnormal and interval indicators that is easy for visual checking. 2.It has a pressure-regulating valve, which can adjust the pressure. 3.It has a pressure gauge that can detect the pressure easily. 4.It has a float switch (NC Contact) that can detect the oil volume. When oil is lower than the minimum level, the float switch will send continuous signal automatically. 5.It has a reset button (RES button), press the button, and it would return to the original setting time and start the cyc
Product Description:
Features: 1.CLHA type has good tight pressing iron, which can press grease out smoothly. 2.Low cost, and high practicality. 3.Easy to be operated by pushing the handle down for oil feeding. 4.Small size and easy for installation. 5.CLHA type is suitable for grease NLGI grades 0 to 000,and CLHP type is suitable for grease NLGI grades 0 to 2. 6.Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir. 7.Fill the lubricator with grease to exhaust air before the distributors are mounted.
Product Description:
Features: 1.According to the difference of flow rate, there are CLS-10, CLS-30, CLS-50 type, among them, CLS-50 has largest flow rate 4.5 L/min, please refer the specification for details. 2.CLS type is circulating lubricator, which means the oil flows out, then comes back into the oil tank through the cyclic inlet. The cyclic inlet has magnetic filter, which can block the impurities and assure the oil clean. 3.After installing and connecting the piping, feed oil till oil flows out, then start to use this lubricator. 4.It used a high quality pump that not only has steady output pressure a
Product Description:
Features: 1.CEF type is circulating lubricator, which means the oil flows out, then comes back into the oil tank through the cyclic inlet. The cyclic inlet has magnetic filter, which can block the impurities and assure the oil clean. 2.The timer controls the operation and interval time. The electronic box has operation, interval and abnormal indicators. 3.It has a feed-oil button, press the button and the oil will feed immediately. 4.After installing and connecting the piping, press the ˇ§feed-oil buttonˇ¨ till the oil flows out, then start to use it. 5.It used a high quality alloy steel ge
Product Description:
Features: 1.CLA type is divided by the volume of container CLA-6(350cc) and CLA-8(600cc). 2.Low cost, high practicality. It can be used in diverse machinery. 3.Easy to be operated by pushing the handle down for oil feeding. 4.Small volume and easy to install. 5.The unit is equipped with reverse stopper that prevents the back-flow of oil. 6.It has an oil outlet on left or right side of the unit. A dual outlet (left and right sides) is also available. Application of Machines Equipment: 1.This unit can work with the machines that do not need to feed oil at certain time. 2.It's suitable
Product Description:
Features: 1.CES resistance type electric lubricator series include CESA/B, CESMA/B, CESC and CESS types. The accessories are different by each model. Please refer to the specification for further details. 2.The interval time could be set up on request (2, 3, 5, 10, 15, 30, 60 minutes), supply the power, and the lubricator will work automatically. 3.The discharge volume could be set up on request and customers can adjust it by themselves. The standard specification of discharge volume is 3-6 cc/stroke, 1-6 cc/stroke is also available on request. 4.CES series used a Japanese synchronous mot
Product Description:
Features: 1.CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time. 2.The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil. 3.It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) to be interfered. 4
1.CEVB type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. If it is operated with CAB or CBB type volume distributor, it will feed oil during operation time.If it is operated with CDB or T type volume distributor, it will feed oil during interval time.
2.The discharge volume is fixed. Each output point of volume distributor has equal oil amount.
3.It has a pressure-regulating valve,which can adjust the pressure and easy to check from the pressure gauge.
1.Single rotary oil pump is also called Triangular pump or oil circulation pump.
2.Recommend to assemble with 1/4 HP Horizontal Motor.
3.CYP-10A ~ 13A with different flow rate, the standard model is clockwise.Please remark on order while request anti-clockwise one
4.It can be added adjustable pressure valve CYP-AV as optional.The range of pressure adjustment is 2~5 kg/cm?
5.Special request on assembling with reservoir or cyclic inlet or motor with fan, etc. are available. Refer to Chen Ying Circulating Electric Lubricator series products.
1.Fixed amount of oil feeding. The lubrication points of volume distributor supply a fixed flow of lubricant.
2.T and CDB type have many kinds of discharge volume to be chosen: 0.1, 0.2, 0.3, 0.4, 0.5 cc/stroke. As ordering, please details the discharge volume wanted.
3.The standards are assembled detective piston, which can observe if operation is normal.
4.CDB,T type volume distributors have to work with pressure-relief type lubricators, and lubricant will feed during the interval time of the lubricator.
5.T type could be assembled NO (Normal Open) or NC (Norma
electriclubricator56_s.jpg)
greasemanuallubricator785_s.jpg)
circulatingelectriclubricator0587_s.jpg)
circulatingelectriclubricator123_s.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
