Product Description:
Fabrication Material : including AISI 310,AISI 314,AISI 316,AISI316,LAISI 304,AISI314L, etc 1,Ordinary type 2,Balanced type 3,Double Balanced type 4,Rod Reinforced type 5,Double Rod Reinforced type 6,Compound Balanced type 7,"Z" style
The main function of a Twin Separator is to de-fiber and remove impurities quickly and effectively from the stock which just defibered by pulper roughly. It removes light and heavy impurities through a high density cleaner, strainer and a slit or hole screen basket. A single machine will thus be able to have the function of defibering, coarse screening and fine screening together. Hence, it simplifies the stock preparation system as well as enable the strainer of the pulper to be enlarged, which increases the capacity easily.
1. Assembling requires for small room and is possible in any place.
2. The cylinder is made of stainless steel with anti-corrosive property.
3. Due to the design of twin dewatering cylinders, the white water is discharged during the operation from the two sides of the two cylinders, thus the handling capacity per unit is higher than other models.
4. Due to the special design of cylinders, minimum power is required for maximized concentration capacity.
5. The machine is easier in operation with greater a availability of
1. Reject pump feeds paper stock into slush sorter.
2. Paper stock that has passed through slush sorter is fed into the following process.
3. Rejects are discharged intermittently.
4. In automatic operation, the inlet and the outlet of slush sorter close. Then white water is put inside under pressure to for feed rejects up to drum screen.
5. Water separated in drum screen returns to the pulper.
Product Description:
Characteristics : 1. The contaminants are removed without being pulverized to improve the fining operation. 2. The high-consistency processing facilitates the after-treatment process. 3.Small reject ratio scales lower than the tail screen. 4.The attached cleaner could take the place of the high-consistency cleaner. 5.Automatic reject discharge does not require manpower.
Operation Description¡G 1.The standard consistency at inlet is 3% ~ 4%. However, the consistency can be raised up 5%. 2.The standard diameters of holes on the strainer are 2 to 3 mm for waste newspaper and magazin
Product Description:
The Inclined Wire Type Paper Making Machine has higher speed about making paper. The hood of dryer belongs to Closed-Type heating, so you can get more efficiency of heat transfer. In other words, you will get more efficiency of paper¡¦ drying and save your energy & operating cost.
Product Description:
Applying the traditional transverse displacement type felt guider, it always occurs a situation that the differential increment of traditional type felt guider can not be responded to the offset increment of felt in time. It often has a later response to the felt. Our high response felt guider has a high sensitive felt sensor and oscillating motion designing, it always catches the offset increment of felt anytime. So it can be applied to the high speed paper machine ( 1,000 M/min ). You will get easier operation and lower maintenance cost after applying our high response felt guider.
Product Description:
Hydraulic lifting machine is suitable for the paper cutting machine. The cutting machine and hydraulic lifting machine can be independently operational. Complete operation safety, totally safe for operator. The funcient os of sensor is adjustable upward and downward. Efficient in cutting and saving man power.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.gif)
