Product Description:
1. The rubber feed rolls are spring loaded to give zero crush on the boards. 2. The required size of the side guides is preset, they are linked together and set from the center. Fine adjustment can be made by pressing the button on the control panel. 3. The preset distance of the kicker plate and rear check plate are synchronized. Fine adjustment can be made by pressing the button on the control panel. 4. The feed unit has a suction assist system. Suction can adjusted to accommodate different types of warped board. 5. Also featured is a skip feed function to increase the blank size fee
Product Description:
1. The ink supply has a "Low ink" warning device which sounds an alarm and lights a warning lamp, when the ink is running out. 2. The print cylinders are fitted with a locking device which holds the melamine print die backing on the full circumference of the cylinder. This improves print quality. 3. The Print Unit has zero registration, to line up the Feed and Slotting/ Crease Unit, to reduce set up time. 4. The Print Unit has precision running register and a pedal switch on the print cylinder for easy of stereo die mounting. 5. Ceramic laser engraved anilox rolls
Product Description:
1. The required sizes is pre-set via the computer system, micro adjustment can be made by using the buttons on the unit. This speeds up the setting process. 2. The Slotting Unit, printing Unit and Feeding Unit are operated under a pneumatic coupling process to enable the machine frames to undertake a rapid and energy saving opening and closing process. And the frames of Slotting Unit and Feeding Unit can be locked at the same time to enable a more stationary operation. 3. With stop feeding and shut off device. 4. Equipped with electronic sheets counter .
Product Description:
1. Digital controlled glue head can be micro adjusted. 2. Gluer delivers smooth, even coating of glue and cleans easily. 3. Gluing roller is synchronized with main unit and freewheels when machine is turned to prevent glue build up on the wheel .
Product Description:
1. The Squaring Unit uses pressure from air hold down system to keep the finished cases square and allow the glue to set. 2. The automatic counter can be moved left and right to keep it centered on the paper stack. 3. An exhaust fan helps to keep the boxes tight against the take off belt. 4. The paper stop and board inserter are numerically linked and can be electrically micro adjusted. 5. The size of each batch of boxes can be preset so that the boxes are automatically lifted out when the preset number is reached. The height of the board can also be adjusted to keep it from
Product Description:
FULLY PNEUMATIC CONTROL SYSTEM , RANGE OF WIDTH: 1200-1800MM , FINGER OR FINGERLESS TYPE , CENTRAL CONTROL SYSTEM , MAX M/C SPEED: 130M/MIN .
