The main function of a Twin Separator is to de-fiber and remove impurities quickly and effectively from the stock which just defibered by pulper roughly. It removes light and heavy impurities through a high density cleaner, strainer and a slit or hole screen basket. A single machine will thus be able to have the function of defibering, coarse screening and fine screening together. Hence, it simplifies the stock preparation system as well as enable the strainer of the pulper to be enlarged, which increases the capacity easily.
1. Assembling requires for small room and is possible in any place.
2. The cylinder is made of stainless steel with anti-corrosive property.
3. Due to the design of twin dewatering cylinders, the white water is discharged during the operation from the two sides of the two cylinders, thus the handling capacity per unit is higher than other models.
4. Due to the special design of cylinders, minimum power is required for maximized concentration capacity.
5. The machine is easier in operation with greater a availability of
1. Reject pump feeds paper stock into slush sorter.
2. Paper stock that has passed through slush sorter is fed into the following process.
3. Rejects are discharged intermittently.
4. In automatic operation, the inlet and the outlet of slush sorter close. Then white water is put inside under pressure to for feed rejects up to drum screen.
5. Water separated in drum screen returns to the pulper.
Product Description:
Characteristics : 1. The contaminants are removed without being pulverized to improve the fining operation. 2. The high-consistency processing facilitates the after-treatment process. 3.Small reject ratio scales lower than the tail screen. 4.The attached cleaner could take the place of the high-consistency cleaner. 5.Automatic reject discharge does not require manpower.
Operation Description¡G 1.The standard consistency at inlet is 3% ~ 4%. However, the consistency can be raised up 5%. 2.The standard diameters of holes on the strainer are 2 to 3 mm for waste newspaper and magazin
Product Description:
X-axis and Z-axis X-axis travel mm -50;+350 -50;+250 Z-axis travel mm 500 500 X-axis rapid travel m/min 12 12 Z-axis rapid travel m/min 24 24 Measurement LxW mm 2560x3200 2560x3540 Machine height mm 2845 2845 Net weight kg 5500x2 5500x2 Total power consumption KVA 35x2 35x2
Product Description:
The VTL series of vertical turning lathes are designed especially for high precision, high rigidity, high stability, under super heavy cutting conditions including non-symmetric work-pieces.
The outstanding rigidity of the structure and design provides mechanical features for super heavy cutting, which achieves maximum machining accuracy and stability thus increasing the life of cutting tools.
Fanuc spindle motor, high torque and high horse power spindle motor, incorporating a German ZF dual speed gearbox provide high torque and high turning speed allowing the machine to develop and e
Product Description:
X-axis travel mm -50;+430 -50;+430 Z-axis travel mm 600 600 X-axis rapid travel m/min 20 20 Z-axis rapid travel m/min 20 20 LxW mm 2950x3800 2950x3600 Machine height mm 3385 3385 Net weight kg 6000x2 6000x2 Total power consumption KVA 45x2 45x2
Your search for " " has found products.jpg)
.jpg)
.jpg)
.jpg)
.bmp)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
