Product Description:
Features:Users can install beehive-type or three-claw clamping head which can be used as dividing head or dividing plate. The cavity with 63 internal diameter can advance the processing capacity. Dividing plate is processed by heat treatment and is ground precisely. It had twenty-four division holes. The accuracy will be within 30". Every machine had six cover plates and it can cut the thing into 2.3.4.6.8. or 12 division. Even the technician, who seldom uses this machine, can operate it correctly. The machine can advance the processing speed an is suitable for mass production. The processing
Product Description:
The machine is supported by multiple-point force and sturdy. It can overcome the downward twisting force when vertical working disc holds heavy thing(s). Ensure the precision and the life of rotary table. Adopt single-handle and two-stage design for fastening. The first-stage can provide arc processing treatment, adjust loose and tightness of rotary disc, and control the vibration during processing. The second-stage fastening can provide non-vibrating condition during cut-off. Min shaft adopt two-stage design, enlarge fore internal cavity.( We can enlarge internal cavities if necessary.) After
Product Description:
Features: The 1st cutter spindle make with jump head, and the turning direction is as counter clockwise rotation. The 2nd cutter spindle make with fix head, and the turning direction is as clockwise rotation. The cutter head can be adjusted forward/backward and up/down. Workpiece is feed with conveyor. Auxiliary roller may be extended up to 3 feet wide for large work support. The unit can be equipped with brush wheel for through cleaning of burrs after sanding. Precision sensor control prevents the sanding from cornering in the front and rear sections. Adopted is the automatic
Product Description:
Features : Workpiece is feed with conveyor. Auxiliary roller may be extended up to 3 feet wide for large work support. Precision sensor control prevents the sanding from cornering in the front and rear sections. Adopted is the automatic speed regulator to counter balance sanding tension; sanding pressure is controlled by air pressure valve to stabilize uneven sanding surface. Adopted is the automatic length tracking for high precision processing, free from adjustment under speed change, (far superior than the conventional timer that should be adjusted to speed change.)
Product Description:
There are 2 model for choice, one is MPS-500, another is MPS-500S. Complete cycle, except loading and unloading, is automatic operated by a foot switch control. Vacuum suction table or floating ball table offers fast and convenient workpiece loading and unloading. Adopted is the automatic length tracking to promise a high processing accuracy. Sanding speed can be changed in according to different working requirements. Available is multiple cyclical work, (1-9times).
Product Description:
Features : 1. Material is anchored by air pressure valve to ensure a constant sanding pressure by working with buffer system. 2. Sanding belt oscillates to enhance the smoothness from sanding. 3. Feeding speed is controlled by variable speed.
Product Description:
Model GS-306AF sanding range 0~100(W) x 290(L) mm sanding motor 2HP / 4P feed driven motor 1/8 HP spindle speed 50HZ 580/830/1250 RPM sanding belt speed 180/260/390/580 M/min feed speed 5~20 M/min sanding belt size 305(W) x 762 (L) mm machine measurement 95 x 57 x 87 cm packing measurement 103 x 65 x 103 cm N.W/G.W 120/140 kgs
Product Description:
Features : Worktable can be adjusted up/down, and tilt angle. Sanding belt has the ability of oscillating to obtain the smooth sanding results.
Your search for " " has found products.gif)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
