Product Description:
FA Single Slide 1. Feed mechanism is transmitted by Rack and Piston, with steady feed speed. 2. Simple adjustment for feed speed and stroke. 3. Matching surfaces of all parts hardened, ground and lubricated directly. * Suitable for using with RS-N type cylinder.
Product Description:
FD Double Slide 1.Feed mechanism is transmitted by Crank type, with steady feed speed. Simple adjustment for feed speed and stroke. 2.Matching surfaces of all parts hardened, ground and lubricated. * Suitable for using with RS-N type cylinder.
Product Description:
1.It's a PUSH type collet are used mainly on turning, CNC, special purpose machines and other, i.e. 2.High clamping accuracy, high speed and construction of high rigidity. 3.The installation is the same as "Through-hole power chuck" and they are replaceable with each other. No need to change the "Draw tube" 4.The collet used must accord with DIN 6343.
Product Description:
ˇ§Overload Protectorˇ¨ is equipped in Press machine to check hydraulic pressure of cylinder inside the slider. If happen overload, the hydraulic pressure of cylinder will be released immediately within 3/1000 seconds. It has pressure control valve inside of overload protector, which can adjust hydraulic pressure automatically and eliminate the impact of rising pressure (which cause by oil temperature rise) in pressing process.
Product Description:
ˇ§Quick Die Change Systemˇ¨ can help to change die/mold in a short time. It replaces the traditional method which used the screw to fix the die/mold. To insure the safety of operation, the movement between each equipment will be pined down mutually.It has the function of inspection pressure and can be interlocked with the machine.
Product Description:
ˇ§Quick Mold Change Systemˇ¨ is for Injection Molding Machine and Die Casting machine. It adopts four independent circuit of cross clamping to clamp the mold. Each hydraulic circuit is with the function of maintaining pressure for a long time. The desired pressure is not affected by power failure or reduction in air pressure. In order to save time for the mold change and ensure the operation safety, it is just in time to apply Qucik Mold Change System.
Product Description:
ˇ§Air Driven Hydraulic Pump Unitˇ¨ use air to drive hydraulic pump. Once outlet hydraulic pressure reached setting pressure, it will stop driving and wonˇ¦t waste energy. If pressure reduce, it will add automatically. It can maintain pressure for one year. It is used for slide lock, feeder, stick release and hydraulic pressure supply system which needs to maintain pressure for a long time but less operate.
Product Description:
Data Processing Equipment One 17" monitor; One IBM compatible PC with 128MB SDRAM, 52X CDROM, and 40GB HDD; One colour jet printer. 2. Capacity Below 5,000kgf 3. Loadcell With one loadcell ( Capacity from 1000, 2000, ......,to 5000kgf for choosing) 4. Crosshead Speed 0.001~1000mm/min 5. Resolution of Crosshead Speed 0.001mm/min
Your search for " " has found products
.jpg)
.jpg)
