This machine is specially designed for slot cell or wedge paper insertion of ceiling fan stators. All procedure actions are done by the machine automatically except to put on and take off stators. The complete inserting time for 16 poles stator can be shorten to 8 sec/ stator. The production cost will be highly reduced by decreasing the material loss and labor cost.
Specifications: Operation: AC Motor Motor: 3phase, 0.4kw Dimension: 900(L) x 900(W) x 1000(H)mm Weight: 300kgs
Features: High insertion speed is about 0.5 sec/slot for labor saving, cost reduction,
Product Description:
Function: The machine is specially designed for slot cell paper insertion of medium and small size stator. All procedure are done by the machine automatically except to put on and take off stator. The complete inserting time for 24slots stator can be shorten to 12 sec/stator. The production cost will be highly reduced by decreasing the material loss and labor cost.
Specifications: Operation: AC Motor Motor: 3phase, 0.4kw or 0.75kw Dimension: 900(L) x 900(W) x 1000(H)mm Weight: 320gs
Features: High insertion speed (about to 0.5 sec/slot), labor saving, cost reduction, and st
Microprocessor in this machine ensures it to be suitable for different kind of lacing function. The tension device to adjust the lacing tension is also equipped. Laced coil in the shape of tortoise shell increases the lacing efficiency.
Specifications: Operation: Pneumatic & AC Motor Motor: 3phase, 0.4kw Dimension: 1100(L) x 750(W) x 1100(H)mm Weight: 550kgs
Features: Wide range application is suitable from small stator of fan to big stator of air-conditioner. High lacing speed is up to 220 stitches / min. Neat and uniform bind coil stabilizes quality output a
Product Description:
RANGE Accuracy control ¡Ó0.5¢J Compress air pressure 0.8~2.0¡Ó0.01 Salt Spray Capacity 0.5~3.0 Fog salt 6.5~7.2 P.H. Acetic acid 3.0~3.2 P.H.
Function:
The SALT SPRAY TESTER is used to test the anti-erosion quality of the surface of all materials after the rust-proof of painting, coating, electroplating, anoding and rust-proof of greasing. Testing in accordance with national standard: CNS C-6014, H-2040, Z-8026, JIS D-0201, K-5400, D-0205, H-8681, ASTM B-117¡Ketc.
Specifications: Testing Zone: Room temp.~50¢J Add water air cylinder: Room temp.~63¢J External material : P.V
Product Description:
RANGE STATOR I.D.¡G30~120MM STACK HEIGHT¡GMAX. 140RPM
Function:
The machine is suitable for forming up the small to medium size stator coil. Using upper,lower and center axis molds. This machine is not only rearrange the outlook of tone coil, but also fits the sizing rearrangement, especially suitable for the difficult rearrangement of 2 poles stator.
Specifications: Operation: Hydraulic
Motor: 3phase, 1.5kw
Dimension: 900(L) x 1000(W) x 2000(H)mm
Weight: 400kgs
Features: Verical design minimizes the space requirement.
The winding machine is suitable for minimum winding 24 pcs of coils simultaneously. The feeding speed of wire arrangement can be selected simultaneously according to diameter of wire or any pre-set speed.
The machine is suitable for forming up the small to medium size stator coil, the operator puts the coil on left side roller to form up inner side of coil, then put the stator on right side forming mould to finally form up height, inner and outer side of coil to ensure the end product to meet the required specification.
Product Description:
Small, high dynamic AC servomotor for indexing drive Hydraulic or pneumatic locking system Outstanding thermal stability Ultra high speed indexing For high-volume production
Your search for " " has found products.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
