1. Hobs wide variety of gears(spur gears, helical gears, and worms with a small lead angel. 2. Simplified setup operation of infeed through NC control.
3. This is equipped with standard automatic cycle and can be as manual type by changing the select switch. 4. Space-saving type requiring small floor area for installation, due to vertical type.
Product Description:
1.Hobs various gears ( spur gears and helical gears with right/left angles up to 45¢X). 2.The adoption of the numerical control of infeed and feed axis has realized a wide range of cutting cycles including crown hobbing and taper hobbing as well as standard cycle. 3.Unnecessary to create a program by inputting the necessary cutting data to the number table of CRT screen. 4.This hobbing machine has a double cut hobbing function which is standard. 5.This hobbing machine is designed to have a mechanical structure putting emphasis on high precision and great rigidity, thereby being able to cut
SMALL GEAR HOBBING MACHINE 1.Hobs various gears (spur gears and helical gears with right/left angles up to 45¢X) 2.The work spindle and the tailstock spindle are synchronously rotated. 3.Hob spindle speeds: Max. 2,000 min-1. (stepsless control) 4.Equipped with an automatic hob shifting device as standard equipment.
The machine is suitable for forming up the small to medium size stator coil, the operator puts the coil on left side roller to form up inner side of coil, then put the stator on right side forming mould to finally form up height, inner and outer side of coil to ensure the end product to meet the required spe
Product Description:
This machine is suitable for the automatic winding in hanging wire cup of 2 poles and 4.6 poles in medium and big electric machinery. There are two labor positions to change automatically and 4~6 sets of machine are operated by operator.
Product Description:
This machine is specially designed for slot cell or wedge paper insertion of ceiling fan stators. All procedure actions are done by the machine automatically except to put on and take off stators. The complete inserting time for 16 poles stator can be shorten to 8 sec/ stator. The production cost will be highly reduced by decreasing the material loss and labor cost.
Product Description:
The machine is suitable for forming up the medium to big size stator coil, wedge is inserted automatically in accordance with stack height of stator, and coil can be inserted automatically with one pass in compliance with specification of winding by transfer tool.
Product Description:
When forming mould, the wedge will be pressed out by the coil. The formed wedge will be pressed in slots by wedge machine when it¡¦s close to the slots. It will prevent the coil from coming out.
Your search for " " has found products.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
