Product Description:
Features: 1.According to the difference of flow rate, there are CLS-10, CLS-30, CLS-50 type, among them, CLS-50 has largest flow rate 4.5 L/min, please refer the specification for details. 2.CLS type is circulating lubricator, which means the oil flows out, then comes back into the oil tank through the cyclic inlet. The cyclic inlet has magnetic filter, which can block the impurities and assure the oil clean. 3.After installing and connecting the piping, feed oil till oil flows out, then start to use this lubricator. 4.It used a high quality pump that not only has steady output pressure a
Product Description:
Features: 1.CEF type is circulating lubricator, which means the oil flows out, then comes back into the oil tank through the cyclic inlet. The cyclic inlet has magnetic filter, which can block the impurities and assure the oil clean. 2.The timer controls the operation and interval time. The electronic box has operation, interval and abnormal indicators. 3.It has a feed-oil button, press the button and the oil will feed immediately. 4.After installing and connecting the piping, press the ˇ§feed-oil buttonˇ¨ till the oil flows out, then start to use it. 5.It used a high quality alloy steel ge
Product Description:
Features: 1.Fixed amount of oil feeding. The lubrication points of volume distributor supply a fixed flow of lubricant. 2.CAB type has many kinds of discharge volume to be chosen: 0.03, 0.06, 0.10, 0.16 cc/stroke. As ordering, please details the discharge volume wanted. 3.CBB type also has many kinds of discharge volume to be chosen: 0.1, 0.2, 0.3, 0.4, 0.5 cc/stroke. As ordering, please details the discharge volume wanted. 4.CAB, CBB type volume distributors have to work with pressure-relief type oil lubricators, and oil will feed during the operation time of the lubricator.
Product Description:
Features: 1.Easy to operation. 2.Low cost, high practicality. 3.High quality of alloy steel that can maintain each lubrication point with oil. 4.The length of L can be customized. Standard length is steel tube 300 mm.
1.Fixed amount of oil feeding. The lubrication points of volume distributor supply a fixed flow of lubricant. The discharge volume of each outlet is 0.18 cc/stroke.
2.Every piston of CV type progressive feeders cannot deliver its lubricant until the preceding one has discharged it.
3.If one feeder section doesn't receive any lubricant or is blocked, the entire CV type progressive feeder will stop, and that situation can be noticed by the signal of the feeder.
4.The standards are assembled detective piston, which can be seen if operation is normal.
Product Description:
Features: 1.CLA type is divided by the volume of container CLA-6(350cc) and CLA-8(600cc). 2.Low cost, high practicality. It can be used in diverse machinery. 3.Easy to be operated by pushing the handle down for oil feeding. 4.Small volume and easy to install. 5.The unit is equipped with reverse stopper that prevents the back-flow of oil. 6.It has an oil outlet on left or right side of the unit. A dual outlet (left and right sides) is also available. Application of Machines Equipment: 1.This unit can work with the machines that do not need to feed oil at certain time. 2.It's suitable
Product Description:
Features: 1.CES resistance type electric lubricator series include CESA/B, CESMA/B, CESC and CESS types. The accessories are different by each model. Please refer to the specification for further details. 2.The interval time could be set up on request (2, 3, 5, 10, 15, 30, 60 minutes), supply the power, and the lubricator will work automatically. 3.The discharge volume could be set up on request and customers can adjust it by themselves. The standard specification of discharge volume is 3-6 cc/stroke, 1-6 cc/stroke is also available on request. 4.CES series used a Japanese synchronous mot
Product Description:
Features: 1.CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time. 2.The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil. 3.It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) to be interfered. 4
1.CEVB type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. If it is operated with CAB or CBB type volume distributor, it will feed oil during operation time.If it is operated with CDB or T type volume distributor, it will feed oil during interval time.
2.The discharge volume is fixed. Each output point of volume distributor has equal oil amount.
3.It has a pressure-regulating valve,which can adjust the pressure and easy to check from the pressure gauge.
Your search for " " has found productscirculatingelectriclubricator0587_s.jpg)
circulatingelectriclubricator123_s.jpg)
resistancespraygun2987_s.jpg)
typevolumedistributor0897_s.jpg)
gearpump548_s.jpg)
progressivefeeders111_s.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
