| Cheng Feng Machinery Works Co., Ltd |
|
| |
| |
|
| |
| |
 |
|
Whereas the casting performance is significantly affected by the injection speed, oil path of the injection oil cylinder for this machine is of integrated design to fully output the features of high-speed pressure boosting, and allowing three speeds options respectively Fast, Medium and Slow for easier operation.
Clear control panel at-a-glance for easy control of the console by the operator, monitor of location of each and all switches, automatic prompt of location of failure, prompt of manual operation for quick learning; decades of field experience proved man-machine interface touch screen controller to warrant longer service life, lower failure, significantly reduction of service cost, and easier operation and learning.
Memory capacity permits storage of 100 sets of mold parameters; allowing storage of mold parameters in process to be called out if repeated production is required in future.
Fast locating the failure as taught by the screen for immediate repair, particularly in the absence of the service crew from the genuine maker of the part failed.
All control devices being installed in the monitor to avoid damages to the contacts observed with conventional model due to limited use, service light of coils and bulbs, and environmental factors.
Self-lubricated chucks require oil refill by quarter for easy maintenance and cleaning of the console, operation control and extended service life of the console.
Embedded boosting system to reach the boosting result in short time; pressure regulation feasible since oil injection and boosting oil are separately provided from each other.
8. Build-in integrated injection system to reduce pressure loss, and maintain sensitivity and reliability of injection speed. |
|
|
|
|
| |
|
|
| |
| |
 |
|
