|
| |
| |
|
| |
| |
 |
|
This machine is used to folding the PVC or PET blister 3 side edge for folding card. The blister for used on this machine should be process before the thermoforming machine to forming the shape and cut out the size for folding first. This machine is only action for folding the 3 side edge job.
When the blister long is small then 295mm, we could load 2 pcs of blister on this machine to folding at the same time. When the blister size long is beyond 295mm, we could only load one pcs of blister to folding. Our heater design is four heaters on the four sides. When face this situation, we will able to turn off one side of heater for saving power energy consumption.
Some blister only need to folding two side, our machine could turn off the two width side blister off for only folding two side.
The machine model S-21A is only one operator sit. One operator should load 2 pcs of blister at the same time and take out 2 pcs of blister at the same time.
The S-21B has double sit for two operators. We may selection for one operator work on this machine or two operators to work on this machine. The machine have safety design, It will not action when only one operator to press the start switch or the operator are put their hand inside the folding area. It includes 2 sets of sensors on this machine.
|
|
|
|
|
| |
|
|
| |
| |
 |
|
