Material: Pure Molybdenum, Molybdenum content: 99.95 min.
Application: 1) Circles the filament core, the support wire, the lead-out wire, the electronics grid and so on.
2) The support silk, the lead-out wire guide rod, the electricity vacuum components, the heater element, the high temp electric resistance furnace gives off heat the material and so on.
3) Molybdenum wire for EMD wire cut, high tensile strength, small elongation ratio, good stability, high cutting precision.
QDX SUBMERSIBLE PUMP(for clean water) STRUCTURAL CHARACTERISTICS DELIVERY BODY : made from aluminium, particularly resistant to mechanical stress, knocks and corrosion, fitted with UNI ISO 228/1gas threaded vertical delivery opening. FILTER: stainless steel. IMPELLER: aluminium. MOTOR SHAFT: AISI 314 stainless steel. MECHANICAL SEAL: carbon/alumina, MOTOR: designed for continuous duty. The thermal cutout relay (motor protector) is incorporated. INSULATION class B. protection: IP 68. SUPPLY CABLE: supplied standard with 5 metres of cable and plug. EXTERNAL FLOAT switch: standar
[China]
LQCB asphalt gear pump can give performance for transporting the high temperature thick liquid, thin or the thick aerosol liquid, afloat liquid.The medium at the temperature below 300 Deg.C with viscosity 0.02-15pas.
LB freezer gear pump applies to delivering the ammonia machine of fluorine machine N32 and N46 freezing lubricating oil at temperature 10 Deg.C to 80 Deg.C.
SN three screw pump can give performance as a transferpump and a fuel pump for injection delivery in heating system, as motor pump for hydraulic lubricated control in the industry fields.It is a kind of load and unload oil pump and transferpump in petro-chemical and food industry fields.It can be also applied as transferpump, bovster pump, injection pump or lubricating pump in boat and in the ship as a hydraulic pump.
[China]
3G three screw pump applies to deliver clean and non-corrosive medium which has lubricating property at temperature below 150 Deg.C with the viscosity of 3-760cst,The pump's working pressure range form 0.6Mpa to 2.5Mpa and flow capacity range from 0.6m3/h to 123m3/h.
NYP series internal gear pump is a kind of new positive displacement pump,and is designed according to the different fields' requirements of petroleum,chemical industry,paint,medicine,foodstuff and so on.it widly applies to a variety of mediums with different property and vicosity because of special structure and selected different pump's materials.Proper medium temperature:-10 Deg.C to 200 Deg.C (about NYP0.28 & NYP2.3:-10 Deg.C to 80 Deg.C)Proper medium viscosity: 1.0cst-300,000cst(about NYP0.7 & NYP2.3,1.0cst-10000cst)
[China]