 |
|
| |
 |
Subject: |
|
 |
| Buy carbon ductile iron steel pipe |
| |
 |
Content: |
|
|
dear sir,
we looking to buy a carbon ductile iron steel pipe cif dubai with this description. qty unit description item 16000 m.l line pipe,carbon steel,electrical resistance welding,beveled edges,welding ends,api 5l-x52,size 20 inc h,w.t 0.375 inch,12 m.l coated poly ethylelen 3.5mm theck,3layers (plus 20% for repair) shrinkable sleeves for the welding (plus 5%) the dimension (length width&overlap) of sleeve to standard. 1 42000 m.l line pipe,carbon steel,electrical resistance welding,beveled edges,welding ends,api 5l-x52,size 12 inc h,w.t 0.375 inch,12 m.l coated poly ethylelen 3.5mm theck,3layers (plus 20% for repair) shrinkable sleeves for the welding (plus 5%) the dimension (length width&overlap) of sleeve to standard. 2 1 sys pig trap for above line pipe item (2), complete system accordence with drawing ( lanuncher&receiver) the pig trap barrel including:- 1- quick closing mechanism. 2- nozziles. 3- earthing lugs. 4- lifftung lugs. 5- mane plates. 6- support soddles. 7-
flanged pipline connection. 8- it should be supplied with senser & detecter . the pig trap shall be desigend in accordence with most onerous required as per the following codes drawing (launcher & reciver) is attach standareds and specifications to be followed as below : 1- asme vill division 1. 2- asme b31.3. 3- asme b31.8. 3 stud bolt with two nuts,hexagon,carbon steel material,specification: bolt:astm-a 193 b7 nut : astm-a 194-2h 4 500 nos dia of bolt (inch) length of bolt (inch) 1 1/8 8 4-1 500 nos dia of bolt (inch) length of bolt (inch) 1 3/8 10 4-2 5000 nos dia of bolt (inch) length of bolt (inch) 1 11 4-3 1 nos pig launching traps suitable for piple size (16") complete system (valves +by pass+ drian(3")+ pressure gauge,vent 91") on top or under side of trap,pig signaler,try & quick seal closures(hand operating) etc). length of trap: standard length. traps are designed for pipeline, carrying gas. standrad range of pig traps is designed tosuit most inspection requirem
ents with pressure rating up to ansi class 600.traps are hedrostatically tested on the required pressur. note: all flanged (rf) according ansi b 16.5, (astm a-105). 5 1 nos pig receiving traps suitable for piple line size (16") complete system. (valces + by pass+drian (3") + pressure gauge , vent (1_") on top on under side of traps, pig signaler, tray& quick seal closures (hand operating) etc). length of trap: standard length. traps are designed for pipeline, carrying gas. standrad range of pig traps is designed tosuit most inspection requirements with pressure rating up to ansi class 600.traps are hedrostatically tested on the required pressur. note: all flanged (rf) according ansi b 16.5, (astm a-105). 6 32000 m line pipe,carbon steel. size 16 inch , wall thickness 0.375 inch, (api-5l-x42,grade b) erw (electrical resistance welding ) beveled endes with polyethylene coating for coosion & aggressive protection (thick. 3,5 mm)& materilasto maintain damaged coated areas, and s
hrinkable sleeves [ used on position of welding between ends of each pipes (plus 20%) with repper puch & epoxy. note - fluid : sweet gas - double random lengths of pipe not less than (12m) for single piece. 7 6 nos ball valve,(api 6d),carbon steel,bolted bonnet,flanged end raised face full bore and full opening trunnion mounted ball body system : spilt body: astm-a352 lcc/ball:astm-a350 lf2 stem:astm-a182f6a/seat:astm-a350lf2 size:16"/class:600(maniual operator) 8 4 nos ball valve,(api 6d),carbon steel,bolted bonnet,flanged end raised face full bore and full opening trunnion mounted ball body system : spilt body: astm-a352 lcc/ball:astm-a350 lf2 stem:astm-a182f6a/seat:astm-a350lf2 size:8"/class:600(maniual operator 9 8 nos elbow 45'' long radius,carbon steel,welding end (beveled for welding). suitable for intellgent pig.passage inside bare,outside per.coated ,radius 5 d). material specification
best regrds . |
|
|
| |
| 2013/11/10 |
| |
 |
Company Profile: |
|
|
| |
| |
|
| |
|
|
| |
| |
 |
|
