Product Description:
HV-201 1.Open design without an oil reservoir tank.¡C 2.Oil filling and extracting are driven by a pneumatic motor pump. No contact between the oil and the air, preventing the oil from been emulsified. 3.Continuous, variable refilling rates can be controlled by the oil gun or the gas inlet valve. The operation is simple and convenient. The oil refilling gun is a standard component. 4.An electronic flow meter can be attached to measure the volume of the refilled oil. (Optional accessory) 5.Open design without an oil reservoir tank. A 5-gallon oil tank c
Product Description:
1.Use chemical cleanser to clean the system. 2.Adjust pressure as needed. 3.Double-filter design: Filter out dirt during cleaning.
Product Description:
HD-808WN 1.Carbon removing agent is stored with 120£p*180L, 2L stainless steel tank to store carbon-cleaner. A special device is used to produce foam so as to avoid this canned product being discarded after use. It is both environmental protective and economic. 2.The foam can extend the washing time and soaking time so that every corner of the combustion room, branch pipes, etc¡K can be cleaned. 3.They have 3 functions: oil extracting, waste oil draining and carbon removing. 4.A variety of lubricants, gear oil and neutral liquid can be extracted b
Product Description:
HD-806AC 1.Performs dual functions - oil extracting and draining. 2.The oil flow is visual through a clear cup. 3.Filter net screens out impurities to protect the motor and the pump. Machine service life is prolonged. 4.Oil is driven by the motor pump; therefore, the oil can be extracted immediately. It differs from the vacuum type in that the extracting procedure is to vacuum the tank first, and then to extract the oil. 5.It can be used for extracting engine oil, transmission oil, gear oil, and lubricant. 6.A 520mm, extra large draining bowl prevents
Product Description:
Characteristics : combined drawing machine , one of our main product, has combined the machine's advantages of west Germany and Japan. We use the high quality material and spare parts in order to extend the useful life of the machine. We also use the high-grade computer equipment and software, therefore it would be easier to operate the machine.
Product Description:
The length of working range up to 6M, and the diameter of working range up to 5m/m. It can feed and work automatic , and it has double chamfering and double cutting equipment for hexagonal and square bar. The working speed is up to 23 bar per minute. finished products The four types of chamfering machine share the same operation manual We can make chamfering machine according to customer's request
Product Description:
SH-0 SH-1 SH-2 SH-3 SH-4 Max tension (N) 2000 4000 10000 25000 40000 Drawing speed (M/min) 80 60 40 35 25 Braking moment for shearing part (N-M) 100 157 250 360 480 Main power (KW) 50 70 135.15 250 420 Total weight (T) 12 16 31.7 58 75 Size L x W x H (M) 23x1.2x0.9 25.6x1.9x1 31.5x4.7x3.1 37x2.5x3.5 45x3x5 Working range¡G ¡@
Your search for " " has found products.jpg)
.jpg){kind=spacer}
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
