Product Description:
125HP Extra Powerful Drive Thickness of Cut up to 175 mm. Ruggedly Constructed Throughout for Maximum Rigidity and Stability
Specially designed auxiliary powered outfeed roller assures maximum smoothness of workpiece outfeed especially when working on extra thick, heavy and moist wood. MRS-175 has a massive cast iron base,composing the majority of total machine weight of 3000 kgs.This design provides incredible absorption characteristics under deep cutting,especially while performing thick lumber ripping with a multi-blade set up. Precision chain and rails (dip chain) system facilitates
Product Description:
Ideal for finger jointing (for defect) materials and mass material preparation. Provides 3 ~ 5 times higher production rate than manual cut-off saws. Saves over 5% of wood materials. Comprehensive safety guards for maximum operator protection. Compact and user-friendly design. The controller adopts an industrial-grade computer that employs a 32-bit floating-point DSP system. It features flash and battery backup SRAM for double security. Superior to conventional PC-based controls, it can fully eliminate the machine going down or being damaged due to a poor environment, such as, unstable
Product Description:
Maximum thickness of cut up to 125mm (4.92"). The eight lumber hold down rollers are arranged in six rows on both sides of the blade and supported by hinges so that motion is smooth and stable. Guaranteed length of glue joint is 5m (15 feet). Designed to meet the production requirements of companies requiring glue line accuracy, high feed rates, ripping of heavy lumber and multiple shift demands. Speed rates of up to 60M(180') per minute . Available in 15,20, or 25 HP with low voltage control . Variable speed feed + mechanical lubrication. 1550kgs (3,400lbs). of robust cast iron and steel
Product Description:
A versatile rip saw designed for board jointing and material preparation in furniture factories. Also ideal for long material preparation in millwork. 1,450 kgs of massive cast iron and steel construction assures maximum stability and years of trouble-free operations. Maximum cutting thickness is 100 mm. Eight timber holding rolls combined with a 1.2 M. long chain rail guarantees superior straight line accuracy within กำ0.25 mm for 4 M long. The feed system is controlled by a frequency inverter, providing variable speed adjustment. Wide speed range (10 - 40 M/min) makes this machine ideal
Product Description:
The SRS-12 is the flagship rip saw of the entire Kuang Yung lineup. Ideally suited for the millwork,cabinet, and furniture companies requiring both maximum performance and affordability. Guarantee glue line accuracy to 8ft. Safety engineered throughout on SRS-12 Double rows anti-kickback fingers Mechanical type cubricatlon. Auto shut-off of chain if oil levels are low One piece heat treated chain and race Variable speed models are available Maximum main drive motor up to 15HP. Available with single phase saw arbor motor (up to 7.5HP), or without motors and controls for line sh
Product Description:
Since it was first manufactured in 1971, the SRS-300 has been continuously upgraded and improved to give optimum ripping performance and reliability. Robust cast iron & steel construction Guarantee 5ft glue line Small compact design Affordability with durability Fully integrated safety guards Auto lubrication to 5 points with low oil alert Available with single phase saw arbor motor (up to 7.5HP), or without motors and controls for line shaft setup.
Product Description:
1. High speed 12000 rpm high speed spindle can meet the needs of HSC (High Speed Cutting) of Die / Mold and precision parts. 2. High rigidity Three axes employ the roller type linear motion guides to get the better rigidity. 3. High accuracy The 40mm (both ends 45mm) special hollow ball screws with air cooling ensure the highest degree of accuracy.
Product Description:
1. High speed 12000 rpm high speed spindle can meet the needs of HSC (High Speed Cutting) of Die / Mold and precision parts. 2. High rigidity Three axes employ the roller type linear motion guides to get the better rigidity. 3. High accuracy The 40mm (both ends 45mm) special hollow ball screws with air cooling ensure the highest degree of accuracy.
Product Description:
1. KMC Double-Column type machining center series is square guideways construction on 3-axes. 2. High precision extremely rigid double-column construction with no table overhang. 3. Y-axis 70mm step-design for superior stability and machining accuracy.
Your search for " " has found products
