Product Description:
BLISTER PACKING MACHINE It used to seal plastic bister with card board or plastic sheet. This machine had to put the plastic blister and packing artical in to the mould by manual. The mould will auto move into the sealing area by convyor and the production will knock out by auto after sealing. The mould size is 380mm x 600mm. It could seal about 4-8 pcs of blister normally in one mould. The cycle itme is about 4-6sec./cycle. That is mean packing 16-48 pcs productions per min. It have two type of heating method. implus heating and direct heating.
Product Description:
This is use blister to sealing with card board, plastic board or aluminum foil. We have many type of this machine, semi auto to auto, direct heating and implus heating machine. We also offer the packing blister and the blsiter forming machine
Product Description:
Our machine suitable to roll the PVC or PET cylindrical edge into the inner side. It is used to instead of injection tank. This method could use only about 0.2mm ~0.3mm PVC or PET sheet and because the rolling on two sides, it will let the tank feel strong when we touch it.
Product Description:
This machine is used to folding the PVC or PET blister 3 side edge for folding card. The blister for used on this machine should be process before the thermoforming machine to forming the shape and cut out the size for folding first. This machine is only action for folding the 3 side edge job. When the blister long is small then 295mm, we could load 2 pcs of blister on this machine to folding at the same time. When the blister size long is beyond 295mm, we could only load one pcs of blister to folding. Our heater design is four heaters on the four sides. When face this situation, we will abl
Product Description:
This machine is design for packing the tablet and capsule which packing by blister with aluminum foil. The standard of the quotation on this machine which including one set of sealing machine, one set cutting machine, one piece of sealing mould and one set of cutting mould for make this production. This item cause for sealing the aluminum foil with blister, it should be very accurate sealing in perfect condition. If not perfect in sealing, it will air leaking into the sealing area which cause the packing article damaged for stocking. This machine cause is manual type. The user needs to buy
Product Description:
We sell PVC, HIPS, PET, PS, ABS, BOPS, PSP, EPS, PE...ETC VACCUUM FORMING SHEET. ROLLS AND BOARD SHEET ARE BOTH SUPPPLY. EPS AND PSP IS FORAM SHEET.
Product Description:
THE INFRARED RAY SHRINK TUNNEL TAKE ADVANTAGE OF INFRARED RAY TO HEAD PVC/PP SHRINKAGE FILM, WITHOUT INFLUENCE THE PRODUCT. THE MACHINE IS LIGHT AND COMPACT, WORKING SPEED IS 6MMIN. ACCURATE TEMPERATURE SETTING IS ACHIEVED THROUGH TWO SETS OF THE LATEST AUTOMATIC THERMOSTATOR.BOTH TOP AND BOTTOM TEMPERATURE SETTINGS MAY BE VARIED AS DESIRED TO MEET VARIOUS PRODUCT SIZES, WHICH PROVIDES AN EXCELLENT SHRINK PACKING OPERATIONS FOR A WIDE VARIETY OF PRODUCTS. ALSO, LOWERING THE POSSIBILITY OF FILM BREAKAGE TO THE MINIMUM FOR SAVING PACKING COST. S-4020 AND S-6030 THE PRODUCT WILL REMAIN IN SHRI
Your search for " " has found products
.gif)
.gif)
.gif)
