Product Description:
1.Automatic inital infeeding of workpieces. 2.Auto feed table. 3.F-C05 right finger shaper performs scoring,trimming, and shaper on right end of workpiece. 4.Workpieces automatically travel into left finger shaper. 5.F-C06 left finger shaper performs scoring,trimming,shaper and gluing on left end of workpiece. 6.Workpieces travel into the standby conveyor, then feed forward into automatic feeding table. 7.Workpiece feed one by one automatically. 8.Work pieces automatically feed to pre-press assemble stand. 9.Workpieces travel forward for cutting-to-length. 10.Finger assembly
Product Description:
1.Material loaded on table. Material quality may be inspected at this time. 2.Perform trimming and shaping operations on left end of workpiece. 3.The operator change the material to right end for trimming and shaping operations. 4.After both ends of tenon have been cut, place the workpieces onto the table. 5.Performing hand gluing operations on F-G01. 6.The operator feeds workpiece to finger assembler(F-A06) for jointing operations. 7.Cut the workpiece to a desired length. 8.Finger assembler performs jointing jobs. 9.Final products cutfeed and stay for a while for drying.
Product Description:
Bed is made of meehanite and precisely ground , Hardness is HS 70 degree. Auto matic and manual forced Lubrication pump supplies oil to cross slide and bedways. Oil distributor may be adjusted to lubricate bedway,cross slide,or both.. Starting lever with safety device. Emergency foot-operated braking system.
Product Description:
Gang type table saves work time of tool's feeding , changing and return. Using tool holder when the workpiece are various kinds and small quantity. When the workpiece wanna be changed,only alter programs. It is more convenient and economical than automatic lathe and automatic turning machine. All sets of special subplate can be changed. Setting all of tools on subplate in advance is suitable for long-rang and large quantity processing. Don't alter the tools one by one, only replace the subplate when change workpiece. Saving large time or tool test.
Product Description:
1.This is a cloth rolling machine in plane type with wind pressureavailable for rolling carbon fiber cloth , glass fiber cloth and the various fibers to be as roller. 2.Save labor, easy to operate, lessen breakdown, low nosise and easy to maintain. 3.To roll it should press the button by two hands, keep rolling without stop. It is very safe to operate. 4.The low plate is equipped with temperature controller.
Product Description:
1.This is a horizontal type OPP TAPING MACHINE available for binding compound cloth and iron core by OPP tape. 2.Save labor, easy to operate, lessen breakdown and low noise, easy to maintain. 3.The supporting roller is at the same shaft, it can be kept in stable when running. 4.It can be regulated by hand before trial, then turn the automatic after stabling. It is installed with emergency brake and pedal brake, safe to operate. 5.Easy to set up the bending extension, can be set up freely depending on theproducts and material of OPP belt.
Your search for " " has found products
